Migrate *global* zoom_mode settings to genus/type, too.
Nothing can actually set this as a global anymore, but we still honored
it nonetheless.
Fix#7778
* Namely, ensure zoom_mode is consistent with genus & type *both ways*. (I only dealt with the "no zoom_mode" case in my original fixup).
Because documents with settings dating back from before the new zoom modes had "old" zoom_mode settings mixed with "new" genus/type defaults that didn't agree with each other.
It lead to super-confusing ConfigDialog behavior, because ConfigDialog was in fact not reflecting the reality.
(As the source of truth is actually `zoom_mode`).
* There was a snafu in manual mode, because of the extremely weird way prefixes are handled by Configurable/ReaderConfig/DocSettings/ConfigDialog.
So, make sure we only have a *single* zoom_factor, and that it's updated and saved properly under the right name everywhere.
Fixes inconsistencies between first swapping to manual mode, and what the ConfigDialog said/did (because again: possibly a lie), vs., re-opening the same document, which would magically use *different* settings, closer to what was expected (but still broken because of the prefix mismatch and a disagreement on defaults between the two variants).
Fallout from #6885
Notification: adds some functions so it can be used as
a notification manager.
Have various bits of code emitting events that may generate
notifications advertize themselves as the source for following
notifications.
Add a menu to allow selecting some subsets of sources
to show or hide.
Use a table & table.concat instead of individual concats.
And then use that same table for every hash-related operation.
(Nothing else uses the configurable hash function, otherwise I'd have
limited the table shenanigans to the function itself).
Ought to be faster than our naive array-based approach.
Especially for the glyph cache, which has a solid amount of elements,
and is mostly cache hits.
(There are few things worse for performance in Lua than
table.remove @ !tail and table.insert @ !tail, which this was full of :/).
DocCache: New module that's now an actual Cache instance instead of a
weird hack. Replaces "Cache" (the instance) as used across Document &
co.
Only Cache instance with on-disk persistence.
ImageCache: Update to new Cache.
GlyphCache: Update to new Cache.
Also, actually free glyph bbs on eviction.
* Minor updates to the min & max cache sizes (16 & 64MB). Mostly to satisfy my power-of-two OCD.
* Purge broken on-disk cache files
* Optimize free RAM computations
* Start dropping LRU items when running low on memory before pre-rendring (hinting) pages in non-reflowable documents.
* Make serialize dump the most recently *displayed* page, as the actual MRU item is the most recently *hinted* page, not the current one.
* Use more accurate item size estimations across the whole codebase.
TileCacheItem:
* Drop lua-serialize in favor of Persist.
KoptInterface:
* Drop lua-serialize in favor of Persist.
* Make KOPTContext caching actually work by ensuring its hash is stable.
Includes:
- MathML: a few minor fixes
- (Upstream) lvtext: fix possible index out of range
- Fonts: RegisterExternalFont() should take a documentId
- Fonts: fix: letter-spacing should not be applied on diacritic
- (Upstream) Fonts: more granular synthetic weights
- Fonts: synthesized weights: tweak some comments
- Fonts: keep hinting with synthetic weight
- Fonts: fix synthesized weight inconsitencies
- Fonts: fix getFontFileNameAndFaceIndex()
- Fonts: adds LVFontMan::RegularizeRegisteredFontsWeights()
- Fonts: handle synth_weight tweaks in glyph/glyphinfo slots
- (Upstream) Fonts: fix some compiler warnings
- Fix hyphenation on Armenian and Georgian text
Update the bottom menu widget "Font Weight" to allow more
granular weights than the previous "regular | bold".
Also bump thirdparty/luasec to v1.0.1.
* Wireless: Optimize memory usage in StreamMessageQueue (use an array of string ropes, that we only concatenate once). Allowed to relax the throttling, making transfers that much faster.
* Persist: Add a "zstd" codec, that uses the "luajit" codec, but compressed via zstd. Since both of those are very fast, it pretty much trounces everything in terms of speed and size ;).
* Persist: Implemented a "writes_to_file" framework, much like the existing "reads_from_file" one. And use it in the zstd codec to avoid useless temporary string interning.
* Metadata: Switch to the zstd codec.
There have been a couple of these this month, and keeping stuff that should only ever run once piling up in their respective module was getting ugly, especially when it's usually simple stuff (settings, files).
So, move everything to a dedicated module, run by reader.lua on startup, and that will actually only do things once, when necessary.
It appears the fancy split settings from #6885 were not being honored at all.
Also:
* Made sure "pagewidth" is actually the default zoom mode again, "full" had sneaked in as the default state of the zoom type toggle).
* Display human-readable values in the "Make as default" popup, instead of the raw, meaningless numerical setting.
* Disable zoom options when reflow is enabled, and restore 'em properly when it's disabled.
Fix#7461, #7228, #7192
Followup to #7306.
As discussed there, the only way to make everybody happy is to make 'em context-aware. At which point, trying to make the fact that it's a *device* rotation and not a *content* one come across in the icon design loses its interest, and would actually only further muddy the issue.
So, these are similar is spirit to the traditional rotation icons in pretty much anything that can rotate text content, with a special inspiration from the Kindle 4 & PocketBook UI.
Fix#7429
* LuaSettings/DocSettings: Updated readSetting API to allow proper initialization to default.
Use it to initialize tables, e.g., fixing corner-cases in readerFooter that could prevent settings from being saved.
(Fixes an issue reported on Gitter).
* LuaSettings/DocSettings: Add simpler API than the the flip* ones to toggle boolean settings.
* Update LuaSettings/DocSettigns usage throughout the codebase to use the dedicated boolean methods wher appropriate, and clean up some of the more mind-bending uses.
* FileChooser: Implement an extended default exclusion list (fix#2360)
* ScreenSaver: Refactor to avoid the pile of kludges this was threatening to become. Code should be easier to follow and use, and fallbacks now behave as expected (fix#4418).
Includes:
- LVString: Fix a c/p issue in lString8::atoi64
- LVTextFm: Simplify and fix resizeImage logic
- LVXMLParser::ReadText(): fix parsing at buffer boundaries
- TextLang: fix lang_tag first part comparison
- CSS font-family: fix parsing of 'inherit' and '!important'
- CSS: support a few -epub-* and -webkit-* properties
- Text fragment flags: add LTEXT_HAS_EXTRA
- CSS: add support for 'line-break' and 'word-break'
- Menu widget: allow specifying the number of items per
page and the item font size, so we can use other values
than the default File browser ones
- Menu: fix setDirty when a border is used
- ToC: add item per page and font size settings, make
Alternative ToC more visible (was previously
available on long-press on Table of contents)
- Bookmarks: add item per page, font size, size reduction
- Progress bars (Skim widget and footer): allow selecting
ToC depths from which ticks are made.
as it is used for the "Set as default" popup.
This allows having that text accurate on widgets without an
actual name_text (e.g., the font size wheel).
Fix#7231
Co-authored-by: Frans de Jonge <fransdejonge@gmail.com>
Rework Dual pages code so that the view is considered
a single page number, so it looks more like 2-columns
on a single page.
This solves a few issues like:
- Page number and count are consistent between top
and bottom status bars
- SkimTo -1/+1 doing nothing every other tap
- Statistics being wrong (like "Pages read" never
going over half of the book page count)
* Fix typo in dropbox
Reported by @lescheck
* Rephrase text justification explanation more elegantly
* CoverBrowser: fix up some plurals
* Statistics: remove random use of template function
* Use ngettext for minute/minutes and second/seconds
* Change KB/MB/GB to kB/MB/GB SI units
Hide bottom panel when showing a SpinWidget, so we gain
on the bottom the space covered by the SpinWidget to see
more how a change is affecting the book text.
For clarity, rename delay_repaint & refresh_callback
to hide_on_apply & when_applied_callback.
Normalize SpinWidgets: have them both accept a
cancel_callback and a close_callback.
InfoMessage: call dissmiss_callback also on timeout.
Rework eb66856d so that "Sync T/B Margins" is disabled
when set Top and Bottom margins differ (previously,
the bottom one was taking over the top one when
it was enabled).
